ZBoost YX550-ALTE-AWS Guia do Utilizador descarregar pdf (Página 9)

zBOOST

SOHO DATABLAST USER GUIDE

zBOOST

SOHO DATABLAST USER GUIDE

At Initial Power Up Only

Solid GREEN Normal condition at power up.

Slowly Alternating RED and GREEN zBoost is working, but at reduced performance and

coverage due to “non-ideal” setup.

Solution: Increase the distance between antenna

and amplier to achieve maximum performance and

coverage.

Fast Flashing RED Indicates insufcient distance between the antenna and

the amplier. The amplier is operating at signicantly

reduced coverage.

Solution: Increase space between base unit and

antenna.

Solid RED System is receiving signals from either the mobile

device or the base station transceiver which are too

strong for proper operation.

Solutions:  Move away from receiving antenna with

your cell phone.  Move antenna away from other

devices..

Fast Alternating RED and GREEN

followed by no light

The amplier is disabled.

Solution: Unplug your system and re-power.

After Initial Power Up

Solid GREEN

Normal condition

Solid RED

System is receiving signals from either the mobile

device or the base station transceiver which are too

strong for proper operation.

Solution: Unplug your system. Re-orient your Signal

Antenna and/or Base Unit to reduce the excessive

signal source. Plug your system back in. If still solid red,

call customer support 1-800-871-1612.

zBoost Base Unit Light Indicators Technical Specications

This product is covered by patent US 7,706,744. Other U.S. and

foreign patents pending.

Product Specications for zBoost YX550 SOHO DataBlast Series

Specications for VLTE

Band

Specications for ALTE

Band

Specications for AWS

Band

Frequency

Uplink: 776 to 787MHz

Downlink: 746 to 757MHz

Uplink: 704 to 716MHz

Downlink: 734 to 746MHz

Uplink: 1710 to 1755MHz

Downlink: 2110 to 2155MHz

Band supported 13 17 4

Networks LTE (Verizon) LTE (AT&T) AWS

Output Power

+20dBm in UL and

+13dBm in DL

+20dBm in UL and

+13dBm in DL

+20dBm in UL and

+10dBm in DL

General Specications for all zBoost DataBlast Models

System Gain 60dB

Power Consumption – Power Supply Current 3W standby; 7W max signal - 2.0A Max

Wall Supply Input ; Voltage 100-240VAC, 50-60 Hz; 5.0VDC

Input and Output Impedance TNC Connector: 50ohm; F Connector:75 ohm

System Certications FCC Parts 15 & 27, Industry Canada

Base Unit Size and Weight 5” x 7” x 1.25” – 9 oz.

Operating Conditions Indoor Use Only (40° - 105° F)

Coverage (open areas) Up to 2500 square feet

This product uses patented technology to protect the carrier network

1 2 3 4 5 6 7 8 9 10 11

Comentários a estes Manuais

Sem comentários

ZBoost YX550-ALTE-AWS Guia do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores de sinal de rede móvel ZBoost YX550-ALTE-AWS